Page 1 of 1

FastWorks Latest Release 15923

Posted: Mon Mar 31, 2014 1:36 am
by hackish
Latest version of FastWorks release stream is here. You can always install this over whatever current version you have.

Initial installation instructions: Download and run setup.exe. The software will prompt you for your account info or allow you to register a new account. You want to register a new account. Although it is a good idea to have your tactrix cable handy it should be possible to bypass this step.

If you are upgrading from a uvtunes account then simply use your old account as they have all been migrated over from the old server.

Known issues
- If you connect to the ECU then update templates the logging isn't updated with the new template. *quit and re-open software*
- Update templates always downloads the templates rather than only the ones that were updated. * no workaround needed *
- Auto-approval and capture of your license sometimes gives an error. * license has to be assigned by me before proceeding but this is how it has always worked in the past *
- Auto-update not working on some versions of windows. Users will need to download and run a new installer.
- full extended logging not working on all ECUs.

Build 15923
- Fixed several crashes related to closing the software while logging is still open / active.
- Initial install now defaults to the tactrix openport 2.0 cable instead of the ELM/STN unit.
- Logging now correctly translates the units.
- Lancer ralliart install not working correctly

Next release:
- Auto-update now fixed and tested for all available versions of windows.
- full extended logging now working on all ECUs.
- Lancer ralliart install now tested and working.
- Reading of vehicle VIN improved for older KLine ECUs.

Download here: https://www.dropbox.com/s/37o7xutrac5i8 ... p.exe?dl=0

-Michael