Which Tactrix cable do I need?

Discussion related to the 4G69 powered Lancer Rallairt
Post Reply
hackish
Site Admin
Posts: 599
Joined: Wed Jan 05, 2011 1:49 pm

Which Tactrix cable do I need?

Post by hackish » Sun Jan 30, 2011 10:50 am

The Lancer Ralliart can be reflashed with our software using the following cable:
http://www.tactrix.com/index.php?page=s ... &Itemid=53

You also need the Mitsubishi reflash adapter:
http://www.tactrix.com/index.php?page=s ... &Itemid=53

It is possible to rewire the OBD2 port to provide the programming signal on the OBD2 connector. Instructions on this will be posted at a later date.

-Michael

cranswick
Posts: 124
Joined: Mon Feb 27, 2012 2:10 am

Re: Which Tactrix cable do I need?

Post by cranswick » Mon Feb 27, 2012 2:15 am

When you reflashed my ECU last spring, you rewired my OBD2 port, right?

I'll be using a friend's cable, he's got an 09+ Ralliart...

hackish
Site Admin
Posts: 599
Joined: Wed Jan 05, 2011 1:49 pm

Re: Which Tactrix cable do I need?

Post by hackish » Mon Feb 27, 2012 9:20 am

I think I did but I don't remember.

-Michael

cranswick
Posts: 124
Joined: Mon Feb 27, 2012 2:10 am

Re: Which Tactrix cable do I need?

Post by cranswick » Wed Feb 29, 2012 12:14 am

what would it look like? i just want to make sure before i go buy that mitsubishi adapter dongle...

hackish
Site Admin
Posts: 599
Joined: Wed Jan 05, 2011 1:49 pm

Re: Which Tactrix cable do I need?

Post by hackish » Fri Mar 16, 2012 7:07 am

There would be a wire going from the little white plug to a new pin in your OBD2 port. I think it's pin 11.

-Michael

cranswick
Posts: 124
Joined: Mon Feb 27, 2012 2:10 am

Re: Which Tactrix cable do I need?

Post by cranswick » Mon Mar 26, 2012 2:10 pm

ok, yes there is an orange wire spliced from the green wire in the white connector to a pin in the OBD2 port, not sure about the pin layout but it looks like you did modify it, so just the open port 2.0 is required to flash the ROM, thanks for the help.

-Garrett

hackish
Site Admin
Posts: 599
Joined: Wed Jan 05, 2011 1:49 pm

Re: Which Tactrix cable do I need?

Post by hackish » Sun Apr 01, 2012 8:36 am

With the software, yes. It's better if you email me your VIN first so I can enter it into the server. Otherwise there is another step in getting it working - I have to approve the request before you can read the ECU.

-Michael

cranswick
Posts: 124
Joined: Mon Feb 27, 2012 2:10 am

Re: Which Tactrix cable do I need?

Post by cranswick » Sun Apr 01, 2012 1:01 pm

Awesome, thanks

Post Reply